Adjusting Your Car Headlights
The headlights of your car are actually lamps. In order for car headlights to light your way up to your destination they need to be correctly aligned. It's NOT just a matter of simply turning your car headlights on so that you can see your way while driving at night.
If you think that's all it takes then think again. Car headlights should be properly installed at the right angles. Or else, you'll be driving with the headlights lighting the sides only of the road when they should be lighting up the road ahead. You can do the adjusting yourself through the screws you can find on the assembly for the headlights. You will need only a single screwdriver to complete the task.
To check if you do need to adjust your car's headlights, park your car first somewhere where the ground is flat. Make sure that the front of your car is facing a flat surface. For example: a wall, a fence, or perhaps a garage door. And if you haven't already done so, turn your headlights on. You would know that they are correctly mounted if they are straightly even! If you find that they do need a little tinkering and adjusting, you can lower or raise the beams by loosening or tightening the adjustment screws of the headlights with your screwdriver.
The adjustment screws can be found usually on the side and the bottom of the headlights. Many auto Parts Discount stores stock huge range of high quality headlights as well as headlamps for various types of motor vehicles. You can find other helpful advice and information regarding how to avoid car repair rip offs.